Don Aslett Foam N' Flush Toilet Bowl Cleaner - Eco Friendly Toilet Bowl Cleaner


Environmentally Friendly Toilet Bowl Cleaner

If you worry about harsh toilet bowl cleaners hurting you, your septic system or the environment try Don Asletts’s Foam n’ Flush. The patented organic acid toilet bowl cleaner dissolves tough hard water rings, cleans, brightens, and deodorizes – all without irritating harsh fumes. And once it’s done the job of cleaning, you can flush with peace of mind, knowing it’s biodegradable, won’t harm the pipes, or your septic system.

Foam n’ Flush is a liquid formula made to be used with a johnny mop – so you can squirt a little on the mop, then swirl and scrub up a thick, clinging foam that sticks where you put it, putting the organic acid to work cleaning your toilet bowl while you take a break! Once it’s had a few minutes of “dwell time,” just give it a quick scrub and flush!

  • ECO FRIENDLY: Foam & Flush is made of biodegradable organic acid formula. Safe for your home and plumbing, but tough on toilet stains.
  •  NO HARSH SMELL: Foam & Flush is fume-free and great for people with asthma or chemical sensitivities. 

  • SEPTIC SYSTEM SAFE: Don’t ruin your expensive septic system, Foam & Flush is safe for septic systems.

  • FOAMING: Foam and flush is a quick-foaming formula when used with our bowl swab to make toilet cleaning easier. The foaming bubbles cling to the toilet and work to remove stains and hard water residue. 

  • DIRECTIONS: Use a Swab to plunge the water down to expose the toilet bowl ring. Apply Foam & Flush to the swab and begin to activate the foam by rubbing it around the inside rim of the toilet bowl. Work your way around the toilet as the foam clings to the sides. Once applied everywhere in the toilet bowl, let it sit for 2-3 minutes. Flush and reveal a sparkling clean toilet. Foam & Flush is not for use on sinks, tubs, showers, marble, or granite

 Contains two 32 oz bottles

Pair with our Johnny Mop for full foaming action while cleaning. 

    Product Use Instructions:

    Start by lowering the water level – using the Johnny Mop plunge water down the throat of the toilet. After 10-12 motions, the trap in the throat of the toilet should open and empty the bowl without flushing. This will allow the water level to stay low for improved cleaning.

    Apply approximately 1 oz of Foam N Flush to the Johnny Mop. Agitate the Johnny Mop inside the toilet bowl and up under the rim, paying particular attention to the water ring. The high foaming action will allow Foam N Flush to cling to the inside of the bowl, lengthening dwell time so the chemical stays in contact with the soil longer, improving cleaning action.

    Allow Foam N Flush to stay inside the toilet bowl for 4-7 minutes, depending on the severity of the water ring (For heavy build-up, a pumice stone or may be required to remove water ring and build up under the rim.)

    Store Foam ‘N’ Flush and Johnny Mop.

    Keep Away From Children

    View the Safety Data Sheet for this item.

    Made in the USA